 HI-403 BT Cube is a small box contains Class 2 Bluetooth module. One end of the cube is a 6 pin Mini-DIN PS/II female connector for connecting to the power source DC 12V car charger while the other end is a 6 pin Mini-DIN PS/II male connector for connecting to the PS/II GPS receiver.
Please consult the enclosed step by step Bluetooth connection set up procedure guides.
Specifications
Bluetooth V1.1 Compliances
 |
| Frequency Range |
2.4 ~ 2.4835 GHz
unlicensed ISM band |
|
| Interface |
USB / UART / SPI |
|
| Receiver Sensetivity |
-80 dBm @ 0.1% BER |
|
| Transmitting Power |
Class 2 -6 dBm ~ +4 dBm |
|
| RF Input Impedance |
50 ohms |
|
| Frequency Hopping |
1600hops/sec. |
|
| Baseband Crystal OSC |
16MHz |
|
| Data Rate |
Up to 723kb/s |
|
| Operating Temperature |
-30° ~ +90° |
|
| Transmitting Range |
10 meters (Typical) |
|
| Power Consumption |
45 mA (Typical) |
|
 |
Blinking:Searching host device
Stay On: Bluetooh connected |
 |
| 6 Pin PS/2 Female |
6 Pin PS/2 Male |
| Color |
Function CN1 |
|
| Green |
RX |
To BT (From GPS) |
5 |
| White |
TX |
To GPS (From BT) |
4 |
| Red |
VCC |
|
2 |
| Black |
GND |
|
1 |
|
| Color |
Function |
CN1 |
| Green |
TX |
5 |
| White |
RX |
4 |
| Red |
VCC |
2 |
| Black |
GND |
1 |
|
- The specifications are subject to changed without notice
- All the names and trademarks are belonging to their
respective companies.
|
|